CFVMG - HEAVY DUTY BRAKE FLUID AS400

  • MSDS: CFVMG
  • Manufacturer: PRESTONE PRODUCTS CORP
  • Product Name: HEAVY DUTY BRAKE FLUID AS400
  • National Stock Number: 9150-00F054443
Product Identification

Product ID:HEAVY DUTY BRAKE FLUID AS400
MSDS Date:04/07/1997
FSC:9150
NIIN:00F054443
MSDS Number: CFVMG

Responsible Party
PRESTONE PRODUCTS CORPORATION
39 OLD RIDGEBURY ROAD
DANBURY, CT 06810-5109
US

Emergency Phone: 203-830-7800

Info Phone: 203-830-7800

Cage: EO340

Contractor
PRESTONE PRODUCTS CORPORATION
DANBURY, CT 06810 US

Telephone: 203-830-7865

Cage: EO340

Ingredients

2-(2-BUTOXYETHYOXY)-ETHANOL, DIETHYLENE GLYCOL MONOBUTYL

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: 0-10%


DIETHYLENE GLYCOL METHYL ETHER, 2-(2-METHOXYETHOXY) ETHANOL

CAS: 111-77-3

RTECS: KL6125000

Fraction By Weight: 0-5%


DIETHYLENE GLYCOL ETHYL ETHER, CARBITOL, CARBITOL

CAS: 111-90-0

RTECS: KK8750000

Fraction By Weight: 0-10%


TERGITOL NONIONIC XD, TERGITOL XD

CAS: 9038-95-3

RTECS: MD0911000

Fraction By Weight: 0-10%


TRIETHYLENE GLYCOL

CAS: 112-27-6

RTECS: YE4550000

Fraction By Weight: 0-10%


2-(2-PROPYOXYETHOXY)ETHANOL

CAS: 6881-94-3

Fraction By Weight: 0-5%


PROPRIETARY ADDITIVES

Fraction By Weight: 0-5%


BUTOXYTRIGLYCOL

CAS: 143-22-6

RTECS: KJ9450000

Fraction By Weight: 0-70%


METHOXYTRIGLYCOL

CAS: 112-35-6

RTECS: KL6390000

Fraction By Weight: 0-40%


TRIETHYLENE GLYCOL MONOETHYL ETHER *97-3*

CAS: 112-50-5

RTECS: KK8950000

Fraction By Weight: 0-70%


POLYETHYLENE GLYCOL; POLYOXYETHYLENE; PEG 400; PEG 75; PEG

CAS: 25322-68-3

RTECS: TQ3500000

Fraction By Weight: 0-80%


TETRAETHYLENE GLYCOL, MONOBUTYL ETHER

CAS: 1559-34-8

Fraction By Weight: 0-80%


PENTAETHYLENE GLYCOL *97-3*

CAS: 4792-15-8

RTECS: RZ2670000

Fraction By Weight: 0-80%


GLYCOL ETHERS, DIETHYLENE GLYCOL, 2,2-OXYBISETHANOL

CAS: 111-46-6

RTECS: ID5950000

Fraction By Weight: 0-80%


POLYETHYLENE GLYCOL ETHYL ETHER

CAS: 27879-07-8

Fraction By Weight: 0-80%


TETRAETHYLENE GLYCOL

CAS: 112-60-7

RTECS: XC2100000

Fraction By Weight: 0-80%


POLYETHYLENE GLYCOL MONOMETHYL ETHER *97-3*

CAS: 9004-74-4

RTECS: PE2630000

Fraction By Weight: 0-25%


TETRAETHYLENE GLYCOL MONOMETHYL ETHER

CAS: 23783-42-8

Fraction By Weight: 0-20%


POLYETHYLENE GLYCOL BUTYL ETHER

CAS: 9004-77-7

Fraction By Weight: 0-25%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATING TO
RESPIRATORY/MUCOUS MEMBRANES. SKIN: IRRITATION/DERMATITIS
W/PROLONGED/REPEATED CONTACT. EYES: IRRITANT, POSSIBLE CORNEAL
DAMAGE. INGESTION: LARGE AMOUNTS MAY CAUSE CNS DEPRES SION &
KIDNEY/LIVER DAMAGE. CHRONIC EFFECTS, ACIDOSIS. GI IRRITANT. CAUSES
ADVERSE REPRODUCTIVE EFFECTSE/RENAL FAILURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, GASTROINTESTINAL DISTURBANCES,
NAUSEA, VOMITING, DIARRHEA, NASAL DISCOMFORT & DISCHARGE,
DROWSINESS, GI DISCOMFORT, HEADACHE, DIZZINESS, NARCOSIS, SLURRED
SPEECH, BLURRED VISION

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/SOAP & WATER.
EYES: IMMEDIATELY FLUSH W/COPIOUS AMOUNTS OF WATER USING A STEADY
STREAM FOR A MINIUM OF 15 MINS. INGESTION: DON'T GIVE ANYTHING BY
MOUTH IF UNCONSCIOUS. OBTAIN MEDICAL ATTENTION IN ALL CASES. NOTES
TO PHYSICIAN: TMEATMENT SHOULD BE DIRECTED AT THE CONTROL OF
SYMPTOMS & CLINICAL CONDITIONS.

Fire Fighting

Flash Point Method:PMCC
Flash Point:218-275F
Extinguishing Media:WATER FOG, FOAM, ALCOHOL FOAM, CO2/DRY CHEMICAL
Fire Fighting Procedures:COOL FIRE EXPOSED CONTAINERS W/WATER. WEAR
POSITIVE PRESSURE SCBA & FULL PROTECTIVE CLOTHING FOR FIRES IN
AREAS WHERE CHEMICALS ARE USED/STORED.
Unusual Fire/Explosion Hazard:A DIRECT STREAM OF WATER/FOAM MAY CAUSE
FROTHING.

Accidental Release

Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE CLOTHING &
EQUIPMENT. COLLECT MATERIAL W/ABSORBENT MATERIAL & PLACE IN
APPROPRIATE LABELED CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. STORE IN A COOL, DRY AREA. KEEP AWAY FROM EXCESSIVE HEAT/OPEN
FLAMES. USE W/ADEQUATE VENTILATION.
Other Precautions:DON'T REUSE EMPTY CONTAINERS UNLESS CLEANED. DON'T
CUT, WELD, DRILL CONTAINERS, EVEN EMPTY. AVOID EYE CONTACT &
PROLONGED SKIN CONTACT. AVOID BREATHING VAPORS/MISTS.

Exposure Controls

Respiratory Protection:FOR OPERATIONS WHERE EXPOSURES MAY BE EXCESSIVE,
A NIOSH/MSHA APPROVED RESPIRATOR W/AN ORGANIC VAPOR CARTRIDGE & A
DUST/MIST PREFILTER/SUPPLIED AIR RESPIRATOR IS RECOMMENDED.
Ventilation:GENERAL FOR NORMAL USE. MECHANICAL/LOCAL EXHAUST: FOR
OPERATIONS WHERE PRODUCT IS HEATED/MISTED & EXPOSURES IS EXCESSIVE
Protective Gloves:POLYVINYL CHLORINE COATED
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING, EYE WASHING/FLUSHING
FACILITIES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH EXPOSED SKIN THOROUGHLY W/SOAP & WATER AFTER USE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>430F
Melt/Freeze Pt:M.P/F.P Text:<-40F
Vapor Density:>1
Spec Gravity:8.5-8.7
pH:9-9.8
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR AMBER/YELLOW LIQUID W/MILD ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
NITRITES, NITROSATING AGENTS, STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO, CO2, NITROGEN OXIDES, NITROSAMINE

Disposal

Waste Disposal Methods:RECYCLE, INCINERATE, TREAT/LANDFILL IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.